Old or new plaster or previously painted surfaces

Walls to be painted should be free from all dirt, oils, fat, Flaking and peeling paints

Apply one coat of undercoat. If walls have previously been treated with Glastone, putty-plast, Rhino-life or any similar product. Undercoat should not be used directly due to chemical reaction causing flaking. Apply a bonding liquid available from hardware stores

Apply paint of chosen colour. Allow two coats

Brick cancer / Efflorescence of face brick. In severe cases phone the office

Surfaces that are oily or fatty must be cleaned properly with one part hydrochloric pool acid diluted with 4 parts water. After all base penetration is complete rinse wall with clean water and while still damp apply primer

Apply one coat of undercoat. If walls have previously been treated with Glastone, putty-plast, Rhino-life or any similar product. Undercoat should not be used directly due to chemical reaction causing flaking. Apply a bonding liquid available from hardware stores

Apply paint of chosen colour. Allow two coats

Underground moisture penetration of walls

Surfaces that are oily or fatty must be cleaned properly with one part hydrochloric pool acid diluted with 4 parts water. After all base penetration is complete rinse wall with clean water and while still damp apply primer

Apply paint of chosen colour. Allow two coats

Repairing cracks and sealing walls

Clean surface with a wire brush, treat affected area twice daily with a hydrochloric solution of 1 part hydrochloric pool acid diluted with 4 parts water for 4 days. After treatment is completed, wash with water

Open a trench along the affected wall to uncover the foundation, clean all dirt and flaking or peeling paints from the exposed wall

No primer is necessary if THATCH PROTECTION is to be used. Apply one coat of the UNDERCOAT / PAINT mixture to walls to be finished in PAINT colour paint

Apply one coat UNDERCOAT. Allow to dry and follow with a coat of SEALER

Apply THATCH PROTECTION to damp walls, allow for three coats or apply PAINT of colour choice, allow for two coats

Apply PAINT of colour choice. Allow to coats. leave trench exposed for at least 48 hrs before filling

Walls

Walls and ceilings to be treated should be free from all dirt, oils, fats and flaking or peeling paints. Surfaces that are oily or fatty must be cleaned properly with 1 part hydrochloric pool acid diluted with 4 parts water. After all base preparation is complete rinse wall with clean water. Allow to dry

Concrete or precast walls for pre-fab housing

Walls and ceilings to be treated should be free from all dirt, oils, fats and flaking or peeling paints. Surfaces that are oily or fatty must be cleaned properly with 1 part hydrochloric pool acid diluted with 4 parts water. After all base preparation is complete rinse wall with clean water. Allow to dry

Apply one coat of the UNDERCOAT / PAINT mixture. Allow to dry. Apply PAINT of same colour

Apply PAINT products to desired finish. Apply PAINT of you colour choice. Allow for two coats