<<<<  Back to Products 

Self-Coat Sealer 

ZERO V.O.C. E.M.T. SEALER

DESCRIPTION

Self-coat Sealer is a water bond, ready to apply, electrometric waterproofing sealant for filling and sealing cracks and joints in both metal and concrete surfaces, stopping water penetration.  When cured, it forms a tough, highly durable, flexible seal that has ultimate protection properties and can tolerate thermal, shrinkage movements. 

USES

Self-coat Sealer has seal, adhere properties. It can be applied over concrete, metal, wood etc. the ideal area for application is metal roofs, parapets, dams, gutters, down pipes, concrete roofs, pre cast panel walls, glazing etc. 

ADVANTAGES

• Fast drying, excellent water resistance property

• Excellent movement tolerance

• Stain resistance

• Impact resistance

• Cures to form an elastic seal

• High fire resistance

• Excellent in sealing cracks and joints

APPLICATION

All joints, cracks, and surfaces must be sound, clean, and dry. Grease, oil, laitance, previous waterproofing, or damp proofing materials and other contamination must be thoroughly removed.  Cleaning may be done by wire brush or sandblasting.  Sealer can be applied by brush, conventional caulking equipment.  Ensure that the sealant is firmly filled into the joints or cracks to give the full strength.  For shrinkage cracks or cracks that occur more than 2 mm wide Sealer mixed with washed sand is recommended. 

SELF-COAT BIND MUST BE APPLIED BEFORE APPLICATION.

TECHNICAL PROPERTIES 

CLEAN UP

Clean all equipment thoroughly with water immediately after use.

STORAGE

Keep containers well sealed.  Store at moderate temperatures

<<<<  Back to Products

____________________________________________________________________________________________________

Disclaimer:

The recommendations contained herein are meant to guide the specified or the uses.  They are based on results gained from our experience and tests and are believed to be reliable.  No guarantee is implied by the recommendations contained herein since method of application, condition of use and cleanliness of the substrate prior to painting are beyond our control.